Product feature
Product parameter
Video tutorial
Z-EFG-20
FAQ
Motion element grease supply period?
Every 6 months or 1 million times movement.
How to control the gripper via 485 communication?
Control message examples will be provided, and the content needs to be written as hex adecimal floating-point
numbers.
numbers.
How to adjust the gripping force of the Z-EFG-20 gripper?
On the side of the gripper housing, there are three small holes, and the left most hole is the potentiometer knob.
Turning the knob counterclockwise increases the force,while turning it clockwise decreases the force.The rotation angle
should not exceed ±120 degrees. Use a small screwdriver to adjust it, and the maximum adjustable force is around
100-120N.
Turning the knob counterclockwise increases the force,while turning it clockwise decreases the force.The rotation angle
should not exceed ±120 degrees. Use a small screwdriver to adjust it, and the maximum adjustable force is around
100-120N.